Best Magnetic Angle Gauge on Amazon





1. Katur Magnetic Angle Gauge






Why choose our Adjustable Magnetic Gauge Tool?

Adjustable Magnetic Gauge Tool

Professional adjustable magnetic angle gauge tool measures the Camber and Caster angle on the wheel hub or brake disc, suitable for automobile cars motorcycles trucks vans SUV tire repair.

Accurate Measurement

It has a powerful magnet could be easily mounted on all kinds of metal surface. (Note:Please double check and make sure the panel is balance before using.You could screw the button behind the gauge to adjust panel level)

Installation Steps

1. Remove the four-wheel positioning sensor (fixture), remove the tire. 2. The magnetic level gauge carefully on the side of the suction wheel disc brakes. 3. The level of adjustment to zero. 4. Installed on the required positioning of special parts. 5. The use of special tools, with the degree of magnetic level instructions, adjust the positioning of parts to the required measurement angle. 6. retest with locator If there is a little deviation, just to fine-tune the vehicle. (Usually a slight deviation does not cause fault location)

Note

The body of gauge is made of high density aluminum and precision level vial, but the mount is made of metal so that please live it away from water, or maybe it will get rusty.





2. KIPA Adjustable Magnetic Gauge Tool




This adjustable gauge allows you to return the strut to the original camber position after dismantling and re-assembling the suspension or to check the amount of camber change before re-installing. Measures the Camber and Caster angle on the wheel hub or brake disc. Suitable for accurate checking of the castor and camber angle.


Wheel Alignment tool, Strong magnetic adsorption mounting on wheel plate. Universial Automotive Tool For Wheel Alignment, Easy to carry and very simple to use, The manual is not included, But you could find manual easily on tube.


It has a powerful magnet could be easily mounted on all kinds of metal surface.(Note:Please double check and make sure the panel is balance before using.You could screw the button behind the gauge to adjust panel level).


The body of gauge is made of high density aluminum and precision level vial, but the mount is made of metal so that please live it away from water, or maybe it will get rusty.




Drop Me a Line, Let Me Know What You Think

© 2020 by Train of Thoughts. All rights reserved - BestAutoProducts.com  Privacy Policy